Interior journey: Sandstone

Tiles---Natural Stone Floor Tiles

-Has a wide range of natural stone floor tiles including basalt, marble, slate, limestone, sandstone and travertine (honed and Trojan edge).

Sandstone

Process

-Sandstone was formed from grains of sand instead of silt or clay, so its final appearance is that of a rock made of compacted sand.

Technical information

-During winter when the home is heated, sandstone floor will absorb warmth and create a warm and cozy feeling. In summer, the reverse applies, with the blinds down and the air conditioner on, sandstone floor will adapt to the cool room temperature and be cool to walk on.

-It is hard wearing floor coverings.

-Sandstone is non-combustible and therefore fire resistant.

-Suitable for indoor and outdoor living.

-Common surface finishes for sandstone

Eg, Homed: The surface of the tile is sanded to create a matte finish

Brushed: Wire brushing gave the surface a worn, textured surface.

Sand Blasted: Is a textured surface with a slightly glossy finish

Sawn or Natural: Natural surface is created by using a gang saw.

Limitations

-Sandstone tiles come in a variety of sizes and thickness. Most common sizes for indoor flooring, walls and paving are 300mm*300mm, 400mm*400mm, 500mm*500mm, 600mm*600mm, 600mm*300mm, 600mm*400mm.

-Thickness will increase generally from 12mm for wall tiles, up to 200mm for floor times and 300mm for pavers depends on the traffic load to choose the thickness of sandstone.

-If it is going to be exposed to moisture, you must make sure that you use a proper sealant.

Normal usage

-Traditionally used in sculpture and architecture

-Flooring and walls in wet and cry areas of your home.

Environmental impact

-It is very hard, durable and long lasting.

-Made up of natural material.

Advantages

-Very hard and durable- last a lifetime with good care

-Low maintenance.

-Available in wide range of colours, styles and patterns

-Hypoallergenic, allergen and bacteria resistant.